Arun prakash VR, Viswanathan R (2019) Fabrication and characterization of Echinoidea spike particles and Kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite. Composites: A 118:317–326
Kim D, Hennigan DJ, Beavers KD (2010) Effect of fabrication processes on mechanical properties of glass fiber reinforced polymer composites for 49 meter (160 foot) recreational yachts. International Journal of Naval Architecture and Ocean Engineering 2(1):45–56
Ramesh C, Manickam C, Maridurai T, Arun Prakash VR (2017) Dry sliding wear characteristics of heat treated and surface modified hematite particles-epoxy particulate composite. Romanian journal of materials 47(3):401–405
B Suresha, RM Devarajaiah, T Pasang, C Ranganathaiah, 2013, Investigation of organo-modified montmorillonite loading effect on the abrasion resistance of hybrid composites, materials and design, vol. 47, pp- 750-758
Irullappasamy Siva, Jebas Thangiah Winowlin Jappes, Bheemappa Suresha, Investigation on mechanical and tribological behavior of naturally woven coconut sheath-reinforced polymer composites, Polymer composites, vol.33(5), pp. 723–732
Junwei G, Zhang Q, Tang Y, Zhang J, Kong J, Dang J, Zhang H, Wang X (2008) Studies on the preparation and effect of the mechanical properties of titanate coupling reagent modified β-sic whisker filled celluloid nano-composites. Surf Coat Technol 202:2891–2896
Yongqiang Guo, Zhaoyuan Lyu, XutongYang, Yuanjin Lu, Kunpeng Ruan, Yalan Wu, Jie Kong and Junwei Gu, Enhanced thermal conductivities and decreased thermal resistances of functionalized boron nitride/polyimide composites, Composites part B: Engineering, vol.164, pp. 732–739
Junwei G, Zhan Q, Dang J, Yin C, Chen S (2011) Preparation and properties of polystyrene/SiCw/SiCp thermal conductivity composites. Journal of applied polymer science, vol 124(1):132–137
Karunagaran N, Rajadurai A (2016) Effect of surface treatment on mechanical properties of glass fibre/stainless steel wire mesh reinforced epoxy hybrid composites. J Mech Sci Technol 30(6):2475–2482
Julyes Jaisingh S, Selvam V, Sureshchandra Kumar M, Thigarajan K (2014) Thermo-mechanical behaviour of unsaturated polyester toughened epoxy silane treated iron(III) oxide nano composite. Indian J Eng Mater Sci 16:241–245
Arunprakash Vincent , Ramesh G and Madhan Kumar S, 2018 Microwave Shielding Behaviour of Surface Treated MWCNT-epoxy Composites in I & J Band-A Note Colloid and Interface Science Communications 24, PP. 89–92
V.R. Arun prakash and R. Viswanathan, microwave shielding behavior of silanized cu and cu-Fe3O4 compound particle-reinforced epoxy resin composite in E, F, I and J band frequencies, Polym Bull (2018) Vol.75 (9), PP. 4207–4225, DOI https://doi.org/10.1007/s00289-017-2262-1
Gokul R and Ramesh kumar R (2019) Mechanical and low velocity impact behaviour of intra-ply glass/Kevlar fibre reinforced Nano-silica and micro-rubber modified epoxy resin hybrid composite, Material research express 6:055302–055308
Landowski, M Strugala, 2017, impact damage in SiO2 nanoparticles enhanced epoxy carbon fibre composites. Composites part B Engineering, 113, 91–99
Rahman, M. Mohamaed Puneeth, Aslam DA, 2017, impact properties of glass/Kevlar reinforced with nano clay epoxy composite. Composite part B: Engineering, 107, 50–61
Ravandi MT, Tran L (2017) Low velocity impact performance of stitched flax/epoxy composite. Composite part. B: Engineering 117:120–121
Arun Prakash VR, Rajadurai A (2016) Thermo-mechanical characterization of siliconized E-glass fibre/hematite particles reinforced epoxy resin hybrid composite. Appl Surf Sci 384(16):99–106
Valenca SL, Griza S, De Oliveira VG, Sussuchi EM, De Cunha FGC (2015) Evaluation of the mechanical behavior of epoxy composite reinforced with Kevlar® plain fabric and glass/Kevlar® hybrid fabric. Compos Part B 70:1–8
Arunprakash VR, Rajadurai A (2016) Mechanical, thermal and dielectric characterization of iron(III)oxide reinforced epoxy hybrid composite. Digest Journal of Nanomaterials and Biostructures 11:373–380
T. Dinesh, A. Kadirvel and Arunprakash, 2018, Effect of Silane modified E-glass fibre/iron(III)oxide reinforcements on UP blended epoxy resin hybrid composite, silicon, Vol.10 (3), PP.1–12
Tsai JL, Huang BH, Cheng YL (2011) Enhancing fracture toughness of glass/epoxy composites for wind blades using silica nanoparticles and rubber particles. Procedia Engineering 14:1982–1987
Hua Y, Linxia G, Premaraj S, Zhang X (2015) Role of interface in the mechanical behaviour of silica/epoxy resin nanocomposites. Materials. 8(6):3519–3531. https://doi.org/10.3390/ma8063519
Guru Raja MN & A.N. Hari Rao, 2013, “Effect of an Angle-Ply Orientation on Tensile Properties of Kevlar/glass Hybrid Composites”, Volume-2, Issue-3, 891–899
Rathnakar G, Shivanand H (2013) Fibre orientation and its influence on the flexural strength of glass fibre and graphite fibre reinforced polymer composites. International Journal of Innovative Research in Science Engineering and Technology 2(3):548–552
Pontefisso A, Zappalorto M, Quaresimin M (2013) Influence of interphase and filler distribution on the elastic properties of nanoparticle filled polymers. Mech Res Commun 52:92–94
Merizgui T, Hadjajdj A, Mecheri Kious VR, Prakash A, Gaoui B (2018) Effect of magnetic iron(III) oxide particle addition with MWCNTs in Kenaf fibre-reinforced epoxy composite shielding material in ‘E’, ‘F’, ‘I’ and ‘J’ band microwave frequencies. Materials research express. https://doi.org/10.1088/2053-1591/11f9de
Hasselbruch H, Von Hehl A, Zoch HW (2015) Properties and failure behaviour of hybrid wire mesh/carbon fibre reinforced thermoplastic composites under quasistatic tensile load. Mater Des 66:429–436
V R Arun Prakash and Julyes Jaisingh (2018) Mechancial strength behaviour of silane treated E-glass fibre/Al6061 & SS-304 wire mesh-reinforced epoxy resin hybrid composite, Silicon, Vol.10, PP-2279-2286
Yang L, Xu G, Guo Y, Ma T, Zhong X, Zhang Q, Junwei G (2018) Fabrication. proposed model and simulation predictions on thermally conductive hybrid cyanate ester composites with boron nitride fillers, Composites Part A: Applied Science and Manufacturing 107:570–578
Junwei G, Lv Z, Wu Y, Guo Y, Tian L, Qiu H, Li W, Zhang Q (2017) Dielectric thermally conductive boron nitride/polyimide composites with outstanding thermal stabilities via in-situ polymerization-electrospinning-hot press method. Compos A: Appl Sci Manuf 94:209–216
Silva H, Ferreira JA, Costa JD, Capela C (2013) A study of mixed mode inter-laminar fracture on nano clay enhanced epoxy/glass fiber composites. Ciencia & Tecnologia dos Materiais 25:92–97
Sokolova OA, Kuhn M, Palkowski H (2012) Deep drawing properties of light weight steel/polymer/steel sandwich composites. Archives of Civil and Mechanical Engineering 12:105–112
Arun Prakash VR, Rajadurai A (2017) Inter laminar shear strength behavior of acid, base and silane treated E-glass fibre epoxy resin composites on drilling process. Defence Technology 13:40–46
Domun N, Hadavinia H, Zhang T, Sainsbury T, Liaghat GH, Vahid S (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials – a review of the current status. Nanoscale 7:10294–10329