I have been back and forth with what to do with my roof top when at the hardware store the other day I found myself standing in from of a rack that had stacks of PVC pond liners. One of them was 7'X10' and I thought that may be perfect as a top layer for the roof. They are 14 mil, UV stable and puncture resistant. I'm thinking you could use contact cement and a roller to glue it down perfectly flat, trim the edges as needed etc. They are black so I also considered that you cold paint them white. I'm thinking about a 1/4" top treated and then the membrane glued on.
Anyone ever consider this use or anyone actually use one? Curious what the thoughts here are about this idea.
Thanks!
If you going to go that way, just look at epm roofing, designed to be a roof. And I would bet you could find a company doing a roof and get a big enough piece for free from their scrap.
Ie no dont use it, and paint will be hard to tick to it.
If that's the direction your thinking of going, I would put on a TPO roof membrane. It's what they use on many RV roofs. It's very durable and is glued down. Can easily find it on Amazon. I used it to replace the roof on my other 25' RV and it was fairly easy to do.
I'm thinking that when I redo my Teardrop I will use the TPO roof membrane.
Even if claimed to be "UV stable" PVC will still degrade with exposure to sunlight, heat, and anything alkali. This is one of the reasons why they require replacement every 10 years, or less, even when covered with the prescribed 12" or more soil over them (especially if that soil is alkali).
14 mil is also pretty thin. I'd be surprised if that was good for even 3-5 years as a trailer roof.
If you want to look into a membrane roof, look into membranes intended for the purpose.
saltydawg":6ih0z4eb said:
If you going to go that way, just look at epm roofing, designed to be a roof. And I would bet you could find a company doing a roof and get a big enough piece for free from their scrap.
Ie no dont use it, and paint will be hard to tick to it.
I think this is the stuff I have had to repair a building underneath it. It's white & Tough.
I have done very large ponds as well, I would got the above route by far.
RE: RV “membranes” … We bought a Jayco with a ” membrane roof ". Upon inspection , it turned out the membrane was the equivalent and thinness of a cheap dollar store plastic tablecloth , complete with some “ material “ on the back that ABSORBED water and spread it all over the cheap untreated 3/32” plywood they used for the “roof “ .. Of course it failed quickly , the first storm and a fallen branch punched ten holes right THROUGH the roof into the cabin … ( not covered under warranty , a $ bill at the RV dealer … to replace it with the same “crap" . Insured naturally through the RV dealer , who was very chummy with the insurance adjuster … ( scam )
On our newest Foamie trailer , we used an 18 ounce heavyweight canvas , glued down and painted , and it’s sat outside for 7 years + now without any roof failure … Easily replaceable , easy to install … and TOUGH !!! Branches , hail , just bounce off …
Very interesting topic.
Question: What are those heavy (usually black) coverings you see on 18 wheelers (going down the highway at 70+ mph) made of?? They seem to hold up very well. Perhaps vinyl??
I love the idea of using vinyl for exteriors. Vinyl siding is great for trailer sides, but has obvious seam issues for roofs.
My 11 years of experience with clear vinyl for windows suggests a life of about 5 years or more. So I have been looking into sheet vinyl for the roof, especially if I can get it in a light color.
After reading a related article
https://rvinspiration.com/rv-life/cheap-diy-rv-skirting/
I am considering using vinyl like that sold by the links found there:
https://billboardtarps.com/
and
https://www.coversandall.com
According to these vendors, it is often used as pond liners, but mostly for billboards. It’s available in various colors; the cheap stuff is white on one side. They are also available from 9 to 50 mil thick.
Anyone have any first hand experience with these vinyl tarps??
saltydawg":2itm4nc0 said:
If you going to go that way, just look at epm roofing, designed to be a roof. And I would bet you could find a company doing a roof and get a big enough piece for free from their scrap.
Ie no dont use it, and paint will be hard to tick to it.
+1 for EPDM roof. I used it on my latest project and it seems to be holding up fine. I found the EPDM material cut to my specs on Amazon. It does require a compatible glue and should be sealed with Dicor type caulk products.
GPW: Maybe something like this..
https://buymbs.com/p-113-mfm-peel-s...xity_cpc&utm_medium=Shopping&utm_campaign=MFM
From that posted ad...
"Peel & Seal roll roofing is 33ft. 6in. long and is ideal for roofs and surfaces that are difficult to waterproof and can be used on many surfaces including: metal roofs, mobile homes, RVs or trailers, and sunroofs."
" ... is made of aluminum composite foil, polymer films, and a rubberized asphalt adhesive back, making it flexible and self-adhering. Peel & Seal roll roofing will not tear, crack or dry out over time. It is designed specifically to reflect heat and resist water and exposure to other elements without any additional coverage needed."
How heavy is it? ... Looks like about a pound per square foot.
What colors? They provide several.
OK on wood or metal, but does it dissolve foam?
Watch the videos, study the links.
Let us know what you think
The peel-and-stick has a lot of appeal:
water proof
UV sunlight safe,
finished surface (no further paint, sealing, etc),
choice of color,
aluminum exterior,
wide width (36 inches) and overlaps easily.
Might be good for some, but not for me because
too heavy for a skin with no structural value other than resistance to penetration,
a little expensive for just a skin,
and I suspect it is not compatible with foam.
Perhaps someone with first hand experience can ring in on this.
As I recall, the guy who put a Pickup Cap on a trailer he pulled with a Scion (maybe I can find a link) used a peel and stick product (without the metal finish??) for the under coat of his floor.