How to Choose High-quality Ringlock Scaffolding - APAC

Ringlock scaffolding can help enhance the performance of your construction projects if chosen well. Your workers can access the higher positions of the building through a quick scaffold system. There are some features of a high-quality Ringlock scaffolding system. 

For more information, please visit our website.

You may face a confusing situation while selecting the right product. It is because you have to consider the construction needs, installation methods, ground stability, budget, and height. However, we have made it easy for you by listing important standards and features of the right construction ringlock scaffolding.

According to the report of the USA Bureau of Labor Statistics, 61 fatalities occurred in the year from scaffolds, and staging. Inferior scaffolding and improper Scaffold Construction cause the most serious scaffold-related injuries.

Whenever you intend to buy a product, you always look for high quality to get the best results possible. The same is the case when you are buying high-quality ring lock scaffolding for construction buildings. If you want some awareness regarding the difference between an inferior Ringlock system and a high-quality Ringlock scaffolding system. This blog will help you out. 

Ringlock scaffolding systems possess different characteristics that include high carrying capacity, greater efficiency, high corrosion resistance, higher safety, and a higher level of versatility. Since its major purpose is to load and unload, you must choose a high-quality scaffold system for the safety of your workers. 

There are a few characteristics that are listed to help you distinguish an inferior Ringlock scaffolding system from a high-quality Ringlock scaffolding system. 

You should make sure that you are buying modular scaffold systems from a dependable supplier since small ringlock scaffolding factories don’t adhere to quality standards strictly.

Goto PENNPLAN to know more.

1. In the case of inferior steel tubes, there is a composition of uneven steel with many impurities. On the other hand, a high-quality Ringlock scaffolding system is composed of high-quality steel tubes. 
2. The cost of graft endemic to the construction industry more or less guarantees that steel tube thickness has been cut. So at the time of purchase, it was not as cheap to use by low ringlock scaffolding components.  
3. Inferior scaffolding ringlock products are easily prone to scratches, damages. and cracks. High-quality Ringlock scaffolding systems are less prone to such situations.
4. You can easily distinguish between the two by checking the molten zinc metallic luster after the galvanizing process, which is absent in inferior systems and present in high-quality Ringlock systems.  
5. It is often off-dimension for low-quality Ring lock scaffolds. The irregular structures can affect the stability of the entire scaffolding system.
6. Inferior ringlocks have poor bearing capacity, while the other has a higher capacity. 
7. You can not easily bend a high-quality Ringlock scaffolding component. On the other hand, an inferior scaffold product can be bent easily because of the lower yield strength.
8. In some cases, inferior Ringlock parts are sold at cheap prices while high-quality ringlock systems are expensive but durable. 

Since the Ringlock scaffolding systems have a higher level of durability, reliability, safety, and efficiency, it is preferred by most construction companies. The reason behind the great quality and high standards lies in the amazing Ringlock scaffolding design. There are a few quality standards that should be met before purchasing Ringlock scaffolds. 

The specific system scaffolding standards vary from country to country, and you must use ringlock systems that meet the requirements of local regulations. For example, in China, these quality standards are imposed by “Technical Specification for Safety of ringlock scaffolding systems in construction industry  NO.JGJ 231-″

All these quality standards are listed as under :

1. Special process equipment should be used for the welding of Ringlock scaffolding system rods. The welding wires should be composed of low-alloy steel and carbon steel for gas shielded welding. The standard for fillet weld height is considered as at least 3.5mm.
2. There should be at least an 8mm thickness of the connecting rosette plate. The Allowable size deviation should be 0.5mm. 
3. There should be a good arc surface contact with the outer surface in case of the spigot joint. It must have a contact area of at least 500 square millimeters. 
4. There should be a ringlock scaffolding ties system for the wedge-shaped bolt that should help it to lock when erecting.
5. The ringlock galvanized spigot joint can be composed of seamless hot dip galvanized steel pipes casing or cast steel casing.
6. There should be a proper system for fixing the scaffold pole connector, such as ringlock diagonal brace, bridge ledger, board bracket.
7. After the welding and fixing process of the ringlock system, the different axial degrees should be a maximum of 0.3mm.
8. The screw rods should adopt trapezoidal teeth in case of an adjustable ringlock base jack and bracket.
9. The material of the bottom plate should be steel Q235.
   
10. The length should be a minimum of 5 buckles for the adjustable bracket and adjustable base screw rod. 
11. The thickness of the nut should be a minimum of 30mm.

Choosing the right Ringlock scaffolding system can be a difficult task due to the availability of different brands in the market. However, knowing the quality standards can help you get the best products. There are a few characteristics that may be lacking in an inferior Ringlock scaffolding.

You can ask a high-quality supplier to help you choose the best Ringlock scaffolding systems with high-quality standards. You can also contact us to help you find cost-effective ringlock products according to your demand.

The 5' 6" x 150' FR Orange Safety Netting offers increased coverage while maintaining the same fire-resistant and OSHA-compliant standards. Constructed from UV-treated HDPE, this netting also features reinforced borders with 1/4" hole openings. It is lightweight, flexible in cold weather, and ideal for securing open-sided buildings and scaffolds against debris. Safety or debris netting plays a vital role in demolition and building construction projects. The netting consists of a mesh material that catches falling objects like bricks, dropped tools, cinder blocks and other debris.

When you need more coverage, the 5' 6" x 150' FR Orange Safety Netting from PowerPak is your go-to solution. Our dedication to keeping you prepared means this netting is always in stock and available for next-day trackable delivery. Constructed from fire-resistant, UV-treated HDPE, it meets OSHA requirements and features reinforced borders with 1/4" hole openings for added durability. Lightweight and flexible, it's perfect for safeguarding your open-sided buildings and scaffolds. Order today to stay ahead and ensure your site remains secure and compliant. Contact us online or call 800-451- to request additional information. Our team is happy to answer any questions.

The company is the world’s best scaffold safety net manufacturer supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.