Here are the key factors when considering to buy stainless steel coils according to your need:
For more information, please visit our website.
For stainless steel products, the installation environment is a key factor.
When choosing stainless steel, we mainly consider the atmospheric conditions, the concentration levels of particular chemicals, and the acid.
If the installation environment is less corrosive, an austenitic stainless steel grade for general purpose is suitable. While, for a highly acidic environment, you need to choose a stainless steel grade like 316, 904L, or .
The temperature of the environment is also an important factor.
In the furnace environment(900-C), the high temperatures will speed up the corrosion of stainless steel.
Also, it puts extra pressure on stainless steel products.
So, if the temperature is always high, you need the well heat-resistant stainless steel, such as 321 and 253MA.
Very low temperature is another factor. Austenitic stainless steels are effective at very low temperatures.
They maintain a higher tensile strength at low temperatures than at ambient temperatures.
Despite a slight degrading of toughness, these steels work well in temperatures as low as -161°C.
Austenitic grades have a low magnetic response.
Those with higher nickel content are not magnetic under any conditions, such as the 316 or 310 grades.
And the ferritic and martensitic stainless steel grades (400 series) are highly permeable.
Moreover, duplex grades like and are also ferromagnetic.
Steel strength is an important factor to consider before you choose the grade, but it is a complex one.
Your requirements for stainless steel depending on the purpose and the installation environment.
In some cases, high strength stainless steels, like austenitic and duplex, are suitable. But in some cases, their disadvantages are also obvious and do not meet your requirements.
For example, high strength austenitic steels produced by work hardening are not suitable for welding. It makes the steels soft.
Stainless steel products come in many forms, such as sheets, bars, and tubes.
The form will affect the grade you need.
Not all grades have all product forms and sizes. Austenitic stainless steels are very versatile.
You can find products in a wide variety of forms and sizes for different purposes. Ferritic steels generally appear in sheet form. And martensitic steels are common in solid bar form.
When installing stainless steel products, there may be some special requirements.
As a result, you may need to change the grade of steel.
For example, you may want non-magnetic steel, need products that are suitable for welding or products with a high degree of forming. Or simply you just want a good-looking product.
Cost is always a factor when choosing to buy stainless steel coil.
And you need to balance it with all the other considerations. Sometimes the best technical steel is too expensive.
But please remember to assess the cost on a life cycle basis.
Do not look at the initial price only then overlook the life cycle. Stainless steel products have a long life, so a high cost for high-quality steel is reasonable.
As long as the quality is good enough, stainless steel is one of the safest materials.
But remember, the quality matters.
So, how do you know if the stainless steel coil you’ve got is good or not? Try out the below methods.
The theory of the “magnet test” is a rumour.
It tells you that you can test the quality of stainless steel with a magnet.
You will get efficient and thoughtful service from Xin Jiyuan.
But the fact is that the magnet is to test whether the steel is austenitic, or whether the steel contains chromium and nickel.
There are three main types of structures in stainless steel: austenite, ferrite, and martensite.
When you see stainless steel with 18/8 or 18/10 marks, it tells you the amount of chromium and nickel.
So, both 18/8 and 18/10 are austenitic.
The “magnet test” is useful when you use it in the right way. And it’s easy to do by simply taking a magnet to your stainless steel coil.
If the magnet sticks, the coil is safe because it indicates no nickel in the steel. But if the magnet doesn’t stick, it means the steel contains nickel, so the coil is not safe for food usage.
This test is credible.
If a magnet is to stick to steel, it is not a nickel (austenitic) alloy.
There is a problem with this theory, however.
First of all, there are no stainless steel pans with magnetic inside and outside. It’s very difficult to find a fully magnetic stainless steel coil on the market.
That’s not surprising. The reason is that austenitic stainless steel which contains nickel is highly resistant to corrosion.
Corrosion resistance is very important to buy stainless steel coil, isn’t it?
If the coil is fully magnetic stainless steel, it would corrode and not last very long. Without nickel, the metal is not stable.
For this reason, it’s not necessary to buy stainless steel coils that are magnetic, nickel-free.
You will find magnetic stainless steel in the outer layer of some quality stainless steel.
It’s to make the coil compatible with induction stovetops in case you need it for cookware. The reason is, induction stovetops use an electromagnetic field to heat the cookware.
So, high-quality stainless steel cookware usually has three layers of metal. The interior is austenite stainless steel. The exterior is ferrite stainless steel. And the middle layer is aluminium.
It’s for good heat conductivity because steel itself does not conduct heat evenly. Stainless steel of poor quality usually has only one austenitic layer.
But there is still a difference in quality between different types of austenitic stainless steel.
Sometimes you will find that austenitic stainless steel is less magnetic. That’s because, during manufacturing, the steel is cold-processed to form ferrite and martensite.
This process makes it easier to corrode and leach.
The formulation of austenitic stainless steel cookware is careful to avoid this. And the result is a very stable austenitic alloy that resists corrosion and leaching of the metal.
So, A carefully-formed, highly-stable, non-corrosive, and nickel-containing stainless steel is safer than a pure magnetic stainless steel.
Pure magnetic stainless steel will break down and corrode over time. And it doesn’t even exist in the market!
To be honest, it’s hard to know whether your stainless steel is of the best quality unless you are a metal expert. Or unless you go to the factory and see how it’s made. Otherwise, you won’t know whether your stainless steel has corrosive materials.
Your best choice is to buy high-quality stainless steel from the start, choose a brand with a good reputation for quality, such as WJH premium stainless steel.
But still, there’s another way for you to determine whether the stainless steel coils you’ve got is potentially harmful.
What is all this stuff? They are the types/grades of stainless steel. No worries. We’ll tell you in detail in the following section after this.
Now let’s focus on how to make use of the tester.
Ever wondered what a Steel Coil truly is? Well, it's essentially a rolled sheet of steel that’s been wound into a coil form. These coils come in various thicknesses and widths, making them incredibly versatile for numerous applications. From construction to automotive industries, the uses of steel coils are almost limitless!
Ah, the production process! Buckle up, because it’s quite a fascinating journey. First off, steel coils start their life as raw materials, typically iron ore. This ore is transformed into molten steel in a blast furnace. Once the steel is ready, it goes through a series of rolling processes. It’s heated, rolled, and then cooled down to create those signature coils we see in warehouses.
Not all steel coils are created equal! There are mainly two types: hot-rolled and cold-rolled. Hot-rolled coils are processed at high temperatures, making them ideal for larger structural applications. Cold-rolled coils, on the other hand, are processed at room temperature, resulting in a smoother finish and tighter tolerances. So, depending on your needs, you might choose one over the other.
From the towering skyscrapers in bustling cities to the car you drive every day, steel coils play a pivotal role. They’re used in manufacturing appliances, automotive parts, and even in the creation of furniture. You name it, and chances are, steel coils are involved in its production!
There’s a reason why steel coils are so popular! They’re cost-effective, durable, and highly customizable. Not to mention, they have excellent mechanical properties that make them suitable for a wide range of applications. Plus, they can be recycled, which is a win-win for the environment!
Looking ahead, the future of steel coils is bright! With advancements in technology, the production process is becoming more efficient, and there’s a growing emphasis on sustainability. Manufacturers are constantly innovating, finding new ways to reduce waste and energy consumption. So, if you’re in the market for steel coils, you’ll likely find even better options on the horizon!