2. Durable and durable: hot-dip galvanized steel pipe has the characteristics of surface luster, uniform zinc layer, no missing plating, no dripping, strong adhesion and strong corrosion resistance. The anti-rust thickness can be maintained for more than 50 years without repair; in urban or offshore areas, the standard hot-dip galvanized anti-rust layer can be maintained for 20 years without repair.
Hongyuan International Product Page
3. The toughness of the coating is strong: the galvanized layer forms a special metallurgical structure, which can withstand mechanical damage during transportation and use. the5. Save time and effort: the galvanizing process is faster than other coating construction methods, and can avoid the time required for painting on the construction site after installation.
6. Comprehensive protection: every part of the plated parts can be coated with zinc, even in the depressions, sharp corners and hidden places can be fully protected.
Disadvantages of galvanized steel pipe:
The zinc layer of cold-dip galvanized steel pipe is an electroplated layer, and the zinc layer is independently layered with the steel pipe substrate. The zinc layer is relatively thin, and the zinc layer is easily attached to the steel pipe substrate and is easy to fall off. Therefore, its corrosion resistance is poor. In newly built houses, it is forbidden to use cold-galvanized steel pipes as water supply pipes.1. Fire protection engineering: The current fire water supply pipes are basically galvanized pipes, and a layer of paint is applied on the outer layer of the galvanized pipes, so that everyone can see the red fire pipes, but in fact they are only galvanized. Formed by zinc pipe processing.
2. Steel structure, welding engineering: There are many shed factories outside. In the past, welded steel pipes were used to build factories. However, welded steel pipes are easy to rust. In order to prevent rust, a layer of paint should be applied. In order to solve this problem, Now many new steel structure projects directly use galvanized pipes, which can save man-hours and last longer.
3. Agriculture: It is mainly used to build warm greenhouses, flower sheds, and pillars for flowers and melons.Some small square tubes, thin steel plates, steel strips, silicon steel sheets, small-diameter or thin-walled steel pipes, various cold-rolled and galvanized steel pipes, and high-priced, easily-corroded metal products can be stored in the warehouse. The warehouse should be selected according to the geographical conditions. Generally, an ordinary closed warehouse is used, that is, a warehouse with a roof, a wall, tight doors and windows, and a ventilation device.
Galvanised steel is a popular choice in industrial, agricultural, and construction projects. The main purpose of galvanisation is to protect the steel from corrosion, and this is achieved by applying a thin layer of zinc, either through a process of ‘hot dip’ galvanising, electro-galvanising, or metal spraying.
There are a lot of reasons why you should choose galvanised steel for your engineering project. And there are a few more reasons why you shouldn’t. Now knowing what galvanised steel sheet properties are, we have highlighted the key benefits and drawbacks that will guide you to making the right choice for your project.
TFM – or Time to First Maintenance – is calculated according to the appearance of rust on five percent of the galvanised steel sheet surface. What this means is that five percent of the zinc coating has now eroded, exposing the steel to corrosion. It is at this stage that maintenance needs to be implemented to protect the integrity of the steel and prolong its durability.
TFM varies according to the atmospheric conditions of the structure. For example, in a dry, rural area with little rainfall and pollution, a TFM could be over 100 years, while in a more humid tropical environment, that TFM might reduce to about 70 years.
The company is the world’s best Galvanized Square Tube supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
By hot-dip galvanising a thin 6mm steel sheet, you are creating a zinc coating of 85 microns, which more than meets the corrosion performance required for many applications across the UK.
A sheet of galvanised steel is smooth to the touch, making it easy to inspect. Being tough and durable, it is resistant to scratches and everyday damage. Any damage tends to occur through mishandling and untreated long-term wear and tear. Due to its smooth surface, should the galvanised steel sheet incur any damage, the integrity of the protection is compromised, making it prone to rusting. Fortunately, this makes it easily noticeable on regular inspection and therefore can be treated quickly and effectively. When it is damaged, it is the zinc that is in the first line of fire. That means that the steel underneath is protected and will only be affected if the blemish is left untreated.
The galvanisation process acts as a protective buffer against oxygen and moisture, resulting in a smooth, rust-free layer. As a result, the steel sheets are perfect for use in projects which require a clean, clinical environment, such as operating rooms and food preparation areas.
Galvanised steel sheet prices may be prohibitive, particularly in large-scale projects. Compared with, for example, cold-rolled steel sheet, galvanised steel is considerably more expensive.
When pricing up a project, you need to consider its durability of the project. For a short-term project, which may be demolished in a short period of time, it would be more economical to use a less durable, but better-priced, alternative. However, for long-term structural projects, the additional costs will more than pay for themselves in terms of longevity and reduction in maintenance over the years. Cheaper is never normally better.
The galvanisation process ensures that the steel sheet remains resistant to rust. However, you need to be aware of the presence of white rust, which can develop over time if the steel is exposed to moisture and not maintained.
White rust is a white chalky substance that can form on the surface of zinc due to moisture. It can cause significant damage to the galvanised coating and can ultimately compromise the durability of the zinc coating.
Otherwise known as zinc hydroxide, this white rust must be treated immediately to prevent it from spreading and reversing the effect of the galvanisation process as a whole. But prevention is better than cure, so ensure the following steps are taken to minimise the risk of white rust in the first place.
If your galvanised steel sheet has developed a white rust coating, then it can be treated. The treatment depends on the severity of the damage to date. If there is a light powdery residue, then it can usually be brushed off with no residual treatment required. However, the more established and severe the zinc oxidisation process, the more remedial treatment is required to ensure it does not compromise the long-term integrity of the galvanised coating.
There are more pros than cons to choosing galvanised steel sheets over alternatives for your construction and infrastructure projects. However, due care and attention need to be paid to the way the steel is stored, handled, and maintained if you are to get optimum return on your investment in the product.
For more information, please visit Steel Pipes.