The Benefits of Using Highway Safety Equipment Supplier

03, Mar. 2026

 

Highway Construction - Benefits of Traffic Control

Large-scale highway construction can be a somewhat high-risk endeavor, given the size of the equipment used and the sheer number of workers and equipment. However, even smaller-sized road work projects have a degree of risk.

If you are looking for more details, kindly visit Anda.

And this holds true for all highway work and construction projects, given the presence of automobile and truck traffic during working hours.

The reality is that, while many safeguards and safety measures are routinely put into place on highway construction sites, these road work zones can be hazardous both for motorists who must navigate an often complex series of signs, cones, barrels, and lane changes, and for highway construction workers who build or repair streets, bridges, and highways.

When Safety is a Non-Negotiable

All deaths on highways are tragic, but many are both needless and unfortunate. Accidents at road work or highway construction sites are often avoidable but occur all too frequently, nonetheless.

As the Centers for Disease Control and Prevention (CDC) has noted,

“Studies show that highway and street construction workers are at a significant risk of fatal and serious nonfatal injuries while working in and around a street/highway construction jobsite. In addition to the risk of injury from passing motor vehicle traffic outside the work zone, there is an equally hazardous risk of injury from movement of construction vehicles and equipment within the work zone.”

For example, the Federal Highway Administration (FHWA) reports on, among other facts, the number of vehicle driver deaths from crashes that occur in work zones.

  • From through , 29,493 individuals (about 776 per year) lost their lives in work zone crashes.
  • Since the peak year of – when 1,186 died in work zones – the number of deaths declined steadily to an average of 635 from -, then increased to an average of 794 from -.

And the Bureau of Labor Statistics (BLS) reports on the number of fatal injuries to highway workers at road construction sites.

  • From -, 2,222 workers were killed at road construction sites—an average of 123 per year.
  • Over the ten years from -, Texas ranked as the state with the most worker deaths at road construction sites (143), followed by Florida (99), Pennsylvania (60), Indiana (52), Illinois (51), California (49), and Tennessee (49).

Because the safety of so many is at stake during even a small road construction or repair project, safety equipment of all types are usually employed on-site.

And this equipment often includes various forms of Traffic Control Safety items.

Cones, Drums, Barriers, Signs, and Trucks – Traffic Control Safety Equipment

Providing and maintaining the proper traffic control and safeguards is an absolute necessity for any roadwork. Whether long-term construction or short-term maintenance and road repairs, temporary traffic control are required for safety.

Generally speaking, highway and road traffic control involves using what is known as temporary traffic control devices. These are the familiar orange cones, barrels, and sometimes even modular barriers used to guide drivers safely through a work zone and protect workers.

Of course, although the use of temporary traffic control equipment and devices is primarily for guiding and channeling vehicle traffic, the main for traffic control systems is to ensure the safety of those drivers and the road workers operating in and around traffic.

In many scenarios, road construction or repairs and highway bridge work activities can impede or even interrupt the normal flow of vehicle traffic along the roadway. This requires highway workers to ensure traffic control for their own on-site trucks and equipment and the regular road or highway vehicles.

And it is through the planned and consistent use of traffic control equipment and devices that these goals can be accomplished. In addition, crews and contractors can help prevent many more common traffic-related hazards while keeping their workers, pedestrians, and drivers safe in and near work zones.

Common Types of Traffic Control Safety Equipment and Their Benefits

Traffic cones are the most ubiquitous road safety device to most drivers. Traffic safety cones are a great way to demarcate pedestrian crossings, temporary lane shifts, shoulder closures, and single-lane closures.

Channelizer drums are used similarly to cones. They can be employed to indicate a change of direction for lane closures and be utilized for separation and crosswalk places in roads or lanes during construction or repairs. These traffic safety devices are perfect for longer-term lane changes and closures due to their size, visibility, and durability.

More than cones, drums, or barricades are needed to make drivers aware of what’s expected of them in a work zone. This is why it is often essential to use various lighted signs, such as arrow signs and message signs, on either the back of trucks or their trailers.

And because much of the road and highway work across the country is often carried out after dark or before sunrise, the utilization of towable light towers is also crucial for safety purposes.

If you are looking for more details, kindly visit Highway Safety Equipment Supplier.

Although not always used or noticed by most drivers passing or navigating through road work areas, specialized vehicles known as attenuators are also key traffic control safety equipment. Having one of these truck-mounted apparatuses positioned along the roadside between a working crew and oncoming traffic is a huge benefit for those workers.

Buying or Renting Your Traffic Control Safety Equipment

Large highway construction enterprises often keep an inventory of various types of traffic control equipment, such as cones and drums. However, purchasing your supply of traffic control safety equipment can be costly in several ways.

The advantages of renting this type of equipment include efficiency, cost-effectiveness, and space savings.

You’ll Save Space

When a construction or repair project is completed, all the equipment has to be stored somewhere. And the space required to keep all of your traffic control equipment means having and paying for additional storage space. And, of course, the larger equipment takes up that much more space. However, by renting this type of equipment, you can eliminate the need for excessive storage.

You’ll Save Money

Getting equipment to a job site costs money. There is the fuel for trucks and other vehicles, the time and labor required for loading, transporting, and unloading equipment, and on and on. By renting equipment such as the traffic control and safety equipment required for each job, you can eliminate a great deal of these added costs.

In addition, traffic safety equipment is notorious for being damaged or destroyed by cars and other vehicles on job sites. Renting also eliminates the need for continually purchasing replacement equipment.

You’ll Save Time

Hand in hand with cost savings, renting the equipment you need when you need it eliminates a great deal of time otherwise required from your crew with loading, transporting, re-loading, and unloading traffic control equipment. And, as every contractor and controller knows, time is money.

Quality Traffic Control Safety Equipment Rentals for Highway Construction Needs

At McClain and Co., LLC, we offer a wide range of quality, reliable, and versatile traffic control equipment and related vehicles.

In addition to traffic cones and drums for use as temporary traffic control channelizing devices, we offer several trailered, towable equipment types, including towable arrow boards, message signs, and light towers. For certain highway and road work projects, additional safety equipment may be necessary for the form of truck-mounted attenuators. McClain has you covered there, as well, with several types to choose from.

With the vast number of highways and bridges across the nation, the safety and integrity of this vital infrastructure require not only routine maintenance but also ongoing repairs, improvements, and other types of highway construction work, as well.

And having the proper equipment to make this work possible is the reason we offer our wide range of products available to our clients.

McClain and Company for the Best in Traffic Control Safety Equipment Rentals

When it comes to  Traffic Control Safety equipment rentals, McClain and Company always make it our mission to provide the absolute best in rental equipment as well as outstanding customer service.

No matter what type of equipment is required, our primary objective is to be able to help our clients select the best equipment rentals needed for their projects. With our combined years of both experience and knowledge, we are confident that we can provide you with the information and assistance you need to complete your highway or bridge project in a timely and cost-effective manner.

In addition to our selection of traffic control equipment rentals, McClain and Company also provide our clients with a wide variety of Under Bridge Inspection Units, Hi-Rail Equipment, Utility and Aerial Equipment rentals, as well as related construction services.

So, if you have questions about our equipment rental services or want to learn more about our under bridge inspection unit rentals, you can simply contact us by calling 1.888.889. or emailing us at [ protected].

Also, if you’re already familiar with our equipment selection and you know what equipment you are looking to rent, simply give us a call to request a quote and let us arrange your rental for you.

Why Highway Safety Equipment is Essential for Construction - J-Tech

Highway Safety

There are some jobs that come along with inherent dangers to employees, including loggers, policemen, and firefighters. Some of the most dangerous jobs in the United States are on the construction site - a fact that’s not so surprising when you consider all the heavy machinery and tools that construction workers use on a daily basis. This can be especially true if your worksite is along a highway or frequently moves, as this adds the danger of both accidents within the construction vehicle movement as well as from other cars driving haphazardly.

Every year, thousands of construction workers are either injured or die on the job. Unfortunately, data projections predict that this is a growing trend, as more and more drivers are engaging with distractions like food and cell phones while on the road. In , there were an estimated 96,000 crashes in work zones, an increase of 42% since . This means that on average, a work zone crash occurs once every six minutes, and every week at least twelve of those crashes will result in a fatality. Alcohol is also a contributing factor to about 25% of those crashes, while speeding is attributed as the main cause of about 28% of work zone crashes.

Protecting your employees is essential to the maintenance of a safe and secure work zone. Using a crash attenuator doesn’t only help to protect your equipment from being damaged; it also lowers the chance of a fall, a contributing factor to a large amount of construction deaths. Keeping your workers safe when you’re working on a highway is all about alerting drivers that there is a work site up ahead, and warning them to slow down. An arrow board or message board rental gives you a budget-effective way to inform drivers that there is a construction site ahead or passing through, giving them the chance to adjust their speed and maintain control of the vehicle. By taking steps to reduce the risk of injury on your sites, employees will feel more confident in their work - leading to benefits for both of you!

At J-Tech, we’ll provide you with the equipment you need to be safe. To learn more about our arrow boards, message boards, attenuator trucks and more safety solutions, contact us at 610-816-.

If you want to learn more, please visit our website Galvanized Steel Bridge Guardrail.