If you are planning to buy a standard padel court, I recommend starting with the official playing area: 10 meters wide by 20 meters long, measured internally. A complete court also requires an enclosed structure, a regulation net, access gates, transparent or mesh walls, suitable sports flooring, and a stable foundation. For most commercial projects, the practical planning area must be larger than 200 square meters because circulation, maintenance access, lighting, and safety clearance are also required.
In this guide, I explain the main standard padel court dimensions, material options, technical specifications, purchasing decisions, and supplier checks that B2B buyers should consider. The exact construction details may vary between indoor and outdoor projects or between governing-body requirements, so I recommend confirming the final design before production and installation.
I have prepared this guide for sports facility developers, padel club operators, hotel and resort owners, school administrators, real estate investors, and distributors sourcing courts for local projects. It is also useful for architects and contractors who need a reliable specification before preparing a site or requesting quotations. The goal is to help buyers compare complete court solutions rather than focusing only on the visible frame and glass.
A standard padel court is a relatively complex sports structure. Its performance depends on the relationship between dimensions, steelwork, glazing, fencing, lighting, drainage, surface preparation, and installation quality. A low purchase price may not represent the lowest total project cost if the court requires extensive modifications after delivery.
The standard padel playing area is 10 m × 20 m, creating an internal surface area of approximately 200 m². The court is normally divided into two equal halves by a net positioned across the 10-meter width. The playing area is enclosed on all sides, allowing players to use the walls as part of the game.
The enclosure commonly uses glass panels at the rear and selected side sections, combined with welded wire mesh or rigid metal fencing. Rear walls are generally designed at approximately 3 m high, while the upper sections and side configurations can depend on the selected court model and applicable rules. I advise buyers to request a dimensioned drawing rather than relying on a product name such as “standard” alone.
The net spans the width of the court and separates the two playing halves. Common specifications place the net height at approximately 0.88 m at the center and up to about 0.92 m at the ends, subject to the relevant rules in the intended market. Court lines are typically designed as clearly visible markings with consistent width and contrast against the artificial turf.
Access gates should be positioned according to the intended playing format and site layout. Some courts use one entrance, while others use two entrances or external access zones for specific club configurations. I recommend checking door swing, lock design, emergency access, and maintenance access before approving the final shop drawing.
| Specification | Common Standard or Planning Reference | Buyer Check |
|---|---|---|
| Internal playing area | 10 m × 20 m | Confirm internal dimensions after installation |
| Playing surface area | Approximately 200 m² | Allow additional space for structure and circulation |
| Rear wall height | Commonly about 3 m | Verify the selected rule set and court model |
| Net height | Approximately 0.88 m center and 0.92 m ends | Check tension, posts, and adjustment system |
Indoor courts are protected from direct rainfall, ultraviolet exposure, and some wind loads, but the building must provide adequate ceiling height, ventilation, lighting, and drainage control. Outdoor courts require more attention to corrosion protection, foundation design, water management, wind exposure, and local weather conditions. A design that performs well indoors may need different coatings, fasteners, and structural calculations for an exposed site.
For outdoor projects, I recommend discussing the local climate with the supplier at the quotation stage. Coastal locations, high-humidity regions, strong sunlight, freezing temperatures, and heavy rainfall can influence steel treatment, glass selection, drainage, and maintenance requirements. Where local building regulations apply, the buyer should also confirm whether structural approval or engineering documentation is needed.
The frame is commonly manufactured from structural steel sections with a protective finish such as powder coating, galvanized treatment, or a combination of corrosion-control processes. The appropriate option depends on the environment, expected service conditions, appearance requirements, and maintenance plan. I recommend requesting coating details and surface preparation information instead of accepting a general statement such as “anti-rust.”
Tempered safety glass is widely used for visibility and ball rebound characteristics. Buyers should confirm panel thickness, edge treatment, fixing method, gasket design, and replacement procedures. Welded mesh is normally selected for strength and ball containment, while artificial turf should be evaluated for pile construction, drainage behavior, color stability, seam quality, and compatibility with padel play.
First, I would measure the available land or building area, including access routes for delivery and installation. The 10 m × 20 m playing area is only the starting point; the full structure, foundations, player access, lighting poles, and maintenance routes require additional planning space. The ground must also be checked for level, load-bearing capacity, drainage, and existing utilities.
Rayjun supply professional and honest service.
A private recreational court may prioritize appearance and basic durability, while a commercial club usually requires higher usage tolerance, convenient maintenance, replaceable components, and reliable installation support. Hotel, school, and municipal projects may require additional safety, accessibility, branding, and documentation requirements. By defining the use before comparing products, I can avoid selecting a specification that is either unsuitable or unnecessarily expensive.
I recommend comparing frame sections, glass configuration, mesh height, turf system, net assembly, gates, lighting, anchors, drainage details, and included accessories. The quotation should clearly identify what is included in the supply scope and what must be purchased locally. Installation, foundation work, electrical connection, transport, unloading, and commissioning are often separate cost items.
Before production, request a general arrangement drawing, foundation requirements, component list, packing information, and installation instructions. The drawing should show internal court dimensions, glass positions, gate locations, anchoring points, and lighting arrangements. I also recommend confirming allowable site tolerances, because a small foundation or level error can complicate glass installation and affect the final appearance.
Structural durability is one of the most important purchasing considerations. Ask how the steel frame is protected, how joints are assembled, and which components can be replaced if damaged. For outdoor projects, the supplier should review local wind and weather conditions rather than applying one identical specification to every region.
Safety should be evaluated across the entire court, not only through the use of tempered glass. Important details include rounded or protected edges, secure glass fixings, stable gates, safe mesh connections, reliable anchors, and a surface that supports appropriate player movement. I would also confirm the cleaning and inspection requirements for glass, turf, fasteners, and lighting.
Service capability is equally important for B2B buyers. A suitable supplier should be able to provide technical communication, production drawings, packing information, spare-part guidance, and installation support. Rayjun, as a metal building materials supplier, can discuss steel structure options, protective finishes, customization requirements, and project coordination for buyers who need a court solution adapted to a specific site.
The total price of a standard padel court depends on the structure, glass, turf, lighting, surface preparation, packaging, shipping, installation, and local construction work. I do not recommend comparing quotations by headline price alone, because two apparently similar courts may have different glass specifications, coating systems, accessories, or installation scopes. A detailed bill of materials provides a more useful basis for comparison.
Minimum order quantity and lead time vary by configuration, production schedule, customization level, and destination. Standardized components may be easier to plan, while branded colors, special gates, modified lighting, or non-standard layouts can require additional engineering and manufacturing time. Buyers should request a written production schedule and identify which approvals are required before the manufacturing start date.
When I evaluate a padel court supplier, I look for clear technical documentation, practical communication, transparent scope, and the ability to coordinate customized requirements. The supplier should explain which specifications are standard and which are optional. It is also useful to ask for packaging details, installation procedures, quality-control steps, and a spare-parts recommendation.
For international B2B purchasing, I would additionally confirm export packing, loading plans, shipping responsibilities, customs documents, and after-sales communication. If a supplier cannot clearly explain how the court will be delivered and assembled, the buyer may face avoidable delays at the site. A professional quotation should make technical and commercial assumptions visible before the order is placed.
A standard padel court is based on a 10 m × 20 m internal playing area, but a successful project requires more than the basic dimensions. Buyers should verify wall configuration, net height, glass, mesh, steel protection, turf, foundations, lighting, drainage, installation, and maintenance requirements. The best specification is the one that matches the site, climate, usage intensity, local regulations, and available budget.
My recommended next step is to prepare a site plan with available dimensions, intended use, indoor or outdoor conditions, preferred court quantity, location, and target delivery schedule. Send these details to Rayjun for a structured review of the metal frame, protective finish, customization options, and supply scope. With an approved technical drawing and clearly defined quotation, you can make a more reliable purchasing decision and reduce installation risk.
Are you interested in learning more about standard padel court? Contact us today to secure an expert consultation!