An FLC2000 replacement flat screen should be selected by verifying the shaker interface, screen dimensions, tensioning method, and required separation performance—not by relying on the model name alone. Screen configurations and machine details can vary, so confirm the exact FLC2000 model and compare the replacement with the installed screen or equipment documentation before ordering. For a useful quotation, prepare the screen’s measurements, mesh or cut-point requirement, backing construction, operating conditions, and order quantity. Yuanpeng can use those details to help assess fitment and discuss suitable wire-mesh screen options.
If you want to learn more, please visit our website.
This guide is for drilling contractors, rig operators, maintenance teams, and distributors sourcing replacement screens for FLC2000 shale shakers. It is particularly useful when an existing screen is worn, a new supply source is being qualified, or the buyer needs to distinguish a physically compatible screen from one that also meets the separation requirement. It is not a substitute for confirming the machine configuration with its manufacturer or checking the screen against the actual shaker.
A flat shaker screen is a screening panel installed on a shale shaker deck. Its wire mesh allows fluid and appropriately sized solids to pass through while retaining larger particles, supporting solids-control operations. The screen’s result depends on more than its nominal mesh description: opening size, wire characteristics, usable area, condition, and how the panel is tensioned can all affect performance.
“FLC2000” identifies the equipment or screen family a buyer is targeting, but the label alone does not establish every fitment detail. The screen must suit the deck’s contact points, fastening or tensioning arrangement, and available space. When a machine has been modified or its previous screen is not original, visual identification alone may be insufficient.
Wire mesh is commonly described by mesh count or by an opening size, but those descriptions are not interchangeable without additional information. Mesh count refers to the number of openings within a defined linear distance, while aperture describes the opening itself. For procurement, specify the required aperture in micrometers (µm) when that information is available, and include the mesh designation only as supporting detail.
Choose a separation requirement based on the drilling fluid, solids to be removed, and process objective. Finer openings may support finer separation, but they can also change fluid throughput and screen life in a given operation. Because conditions differ, do not select a replacement solely because its mesh label matches a screen used on another rig or well.
Replacement screens may use different combinations of wire mesh and supporting layers or frames. Construction can influence panel rigidity, usable screening area, handling, and compatibility with the shaker’s support system. Ask the supplier to describe the proposed construction and confirm that it corresponds to the equipment configuration you have identified.
Material selection should account for the service environment and the screen’s intended use. Buyers may encounter stainless-steel wire mesh and different backing or support designs, but the correct choice depends on the specification and operating conditions. Do not assume that a material or construction described as an upgrade will automatically improve performance in every application.
Record the shaker manufacturer, model designation, and any available serial or configuration information. Note which deck or position needs a replacement, since a machine may use more than one screen arrangement. If the equipment has been repaired or modified, tell the supplier what changed and provide photographs of the deck, screen edges, and tensioning points.
Measure the overall length and width in millimeters (mm), then check thickness, edge profile, and any stepped or recessed areas that affect seating. As a practical inspection target, record dimensions to the nearest 1 mm and confirm them against the machine or a known-correct screen; this is a measurement practice, not a universal FLC2000 tolerance. Also document the usable mesh area and the position of contact points, clips, wedges, or other retainers.
Yuanpeng supply professional and honest service.
Do not measure only the visible mesh. A panel can have an appropriate screening area but still fail to seat or tension correctly if its frame, edge detail, or support profile differs. If measurements are uncertain, send clear photographs with a ruler or caliper reference and ask the supplier to confirm which dimensions are required.
Provide the aperture or mesh designation currently in use, if known, and explain the process goal for the replacement. Include relevant operating details such as fluid type, solids characteristics, and any known throughput or screen-life constraints. These details help a supplier discuss options without treating a mesh number as a complete performance specification.
Ask the supplier to confirm the intended FLC2000 application, physical dimensions, construction, and tensioning compatibility in writing. Compare the quotation or technical drawing with your measurements and equipment information before approving production. When available, retain the approved specification as the reference for repeat orders and incoming inspection.
| Information | What to provide | Why it matters |
|---|---|---|
| Equipment | FLC2000 model details, deck position, and configuration | Helps assess the intended interface and screen arrangement |
| Dimensions | Length, width, thickness, edge profile, and support details in mm | Supports physical fitment verification |
| Mesh requirement | Aperture in µm, mesh designation, or a sample specification | Clarifies the separation target |
| Application | Fluid and solids context, operating concerns, and intended use | Helps frame a suitable construction discussion |
| Order plan | Quantity, destination, required delivery window, and repeat-order outlook | Allows the supplier to address quotation and logistics requirements |
The price of a replacement screen can depend on dimensions, mesh specification, construction, order quantity, packaging, and destination. Minimum order quantity (MOQ) and production lead time can also vary by configuration and current production schedule. Request a quotation based on the complete specification rather than comparing prices for screens that may differ in fitment or construction.
For time-sensitive maintenance, share the required delivery date and destination at the start of the inquiry. Ask the supplier to clarify whether the quoted schedule covers production only or includes packing and shipping arrangements. If you plan repeat purchases, discuss whether the approved specification can be retained for reordering and how any proposed changes will be communicated.
Be cautious of a supplier who confirms compatibility from the FLC2000 name alone without checking relevant dimensions or interface details. Likewise, a mesh designation without clear units or an agreed specification can create avoidable differences between the requested and supplied product. A strong procurement process documents assumptions before the order is released.
One frequent mistake is treating screens with the same model reference as identical in every dimension and construction. Another is choosing a finer mesh without considering the application’s flow and solids-removal needs. Buyers can also overlook the edges and tensioning features, even though those details determine whether a screen sits securely on the deck.
Avoid relying on worn or distorted screens as the only measurement reference. Check dimensions against machine documentation or another verified panel where possible, and flag any uncertainty before requesting production. If the screen has been modified, explain the modification rather than assuming a standard replacement will match it.
The right FLC2000 replacement flat screen is one that matches both the shaker interface and the separation requirement. Confirm the equipment configuration, measure the full panel in mm, specify the mesh or aperture in µm where known, and provide application and order details. These checks help reduce fitment ambiguity and make supplier quotations easier to compare.
To start an inquiry with Yuanpeng, send your FLC2000 equipment details, screen measurements, mesh requirement, photographs, quantity, and delivery destination. Our team can review the information, identify any missing fitment details, and discuss suitable wire-mesh replacement options before you proceed with an order.
If you want to learn more, please visit our website FLC2000 Replacement flat screens.