To select an FLC2000 corrugated shaker screen, first confirm the shaker’s exact make and model, screen-panel dimensions, attachment system, and required separation performance. “FLC2000” is a product or equipment designation used in the shale-shaker market, but the name alone does not establish that every corrugated screen will fit every unit. At Yuanpeng, we recommend checking the machine’s documentation and comparing a sample panel or detailed measurements before placing an order.
You can find more information on our web, so please take a look.
This guide helps drilling contractors, equipment distributors, and procurement teams assess fit, construction, and supplier requirements. It also outlines what to include in an inquiry so a supplier can evaluate a replacement accurately. When equipment variations or previous modifications are involved, confirmation against the actual shaker is more reliable than selection by model name alone.
This guide is for buyers sourcing replacement FLC2000 corrugated shaker screens for drilling-fluid solids control. It is also useful for distributors who need to check compatibility before quoting screens to an end user. If you manage several shakers or purchase screens across different sites, use the same information checklist for each machine rather than assuming that all units share one configuration.
Operators should involve the person responsible for shaker maintenance when possible. That person can verify how the screen is retained, whether the deck has been repaired or changed, and which performance issues need attention. These details help distinguish a screen that is merely similar in appearance from one that is appropriate for the specific installation.
A corrugated shaker screen is a screening panel made with a formed, non-flat profile rather than a wholly flat screening surface. Depending on its design, that profile can provide additional screening surface within a panel footprint. Actual screening performance still depends on factors such as mesh configuration, fluid properties, feed rate, screen condition, and shaker operation.
An FLC2000 corrugated screen is intended for use with compatible FLC2000-designated shale shaker equipment. Corrugated construction does not by itself confirm the panel’s dimensions, hook or frame arrangement, sealing details, or mesh specification. Buyers should treat the equipment designation as a starting point for verification, not as a complete technical specification.
Many shaker screens use a fine screening mesh supported by coarser mesh or a structural backing. The precise layer count, wire material, and bonding method can vary by product design. Ask the supplier to state the proposed construction in writing, particularly if you are replacing a screen that performed well or investigating premature wear.
Stainless steel is commonly considered for screen mesh where corrosion resistance is important, but the correct grade depends on the drilling environment and the supplier’s available construction. Do not assume that two screens are equivalent because both are described as stainless steel. Request material details and confirm whether the offered specification matches your operating and purchasing requirements.
Mesh count is one part of screen selection, but it is not a complete description of separation performance. Aperture geometry, wire diameter, weave, and the overall screen design can affect the openings and the screen’s behavior in service. Where separation characteristics matter, request the manufacturer’s stated technical data rather than comparing mesh labels alone.
If your procurement process uses an API RP 13C designation or related performance information, specify that requirement in the inquiry and ask the supplier to provide applicable documentation for the offered screen. Do not infer certification or compliance from a product name, catalog image, or general statement about screen quality. Yuanpeng can review the information provided by the buyer and confirm which product details can be documented for the proposed supply.
Record the shaker manufacturer, full model designation, and any serial number or nameplate information available. Check the equipment manual or parts documentation for the screen type and retention method. If a unit has been modified or rebuilt, describe the change because the original model designation may not fully describe its current screen deck.
Measure the screen’s overall length and width, and note the frame or panel depth where relevant. Use a tape measure and record dimensions in millimeters, preferably to the nearest 1 mm, while making clear which edges or features were measured. A single overall measurement may not capture a stepped edge, locating feature, or attachment detail, so include close-up photographs alongside the measurements.
Goto Yuanpeng to know more.
Also document how the panel sits in the deck and how it is secured. Note the locations of hooks, wedges, supports, seals, or other retention features, as applicable to the equipment. Do not force a replacement into place if the frame or attachment points do not align; investigate the mismatch before running the shaker.
State the drilling-fluid type and the job’s main screening objective, such as prioritizing throughput, controlling solids, or balancing both. Include operating observations that can guide a specification review, such as blinding, rapid wear, fluid loss, or difficulty removing solids. These are diagnostic clues, not proof that a particular mesh or screen design will solve the issue.
Where possible, provide the current screen specification and explain what you want to change. A supplier can then distinguish a like-for-like replacement request from a performance-adjustment request. Changing mesh or construction without reviewing the fluid and operating conditions can result in a screen that fits mechanically but does not meet the intended process needs.
| Selection point | What to verify | Why it matters |
|---|---|---|
| Equipment fit | Exact shaker model, panel dimensions, and retention details | Prevents a model-name-only compatibility decision |
| Screen specification | Mesh, construction, material, and available performance data | Connects the replacement to the separation requirement |
| Operating conditions | Fluid, solids, observed wear, and screening priorities | Helps assess whether a like-for-like or adjusted screen is appropriate |
| Order requirements | Quantity, packaging, destination, and requested delivery window | Enables a practical quotation and supply review |
Screen pricing can depend on the panel construction, mesh specification, order quantity, packaging, and delivery destination. Minimum order quantities and production or dispatch lead times may also vary by specification and current availability. Because these details are order-specific, request a quotation rather than relying on a generic estimate.
To help a supplier quote efficiently, provide the required quantity, destination, preferred shipment timing, and any packaging or labeling requirements. If you need more than one specification, list each separately and identify the quantity for each. For urgent requirements, ask the supplier to confirm whether the requested configuration is available and what delivery schedule can actually be supported.
Evaluate the supplier’s clarity as well as the quoted price. A useful quotation identifies the screen configuration and makes assumptions visible, instead of relying only on a broad model name. Ask for unresolved fit or specification questions to be answered in writing before approving an order.
The first common mistake is ordering based only on the words “FLC2000 corrugated.” Equipment versions, replacement designs, or field modifications may affect compatibility. Confirm the actual panel and retention arrangement before purchase.
Another mistake is selecting by mesh count alone. Mesh count does not describe every factor that can influence screening behavior, and a finer label does not automatically mean a better choice for every drilling condition. Compare the complete proposed specification with the operating objective and request supporting details where needed.
Finally, avoid treating a photograph or an unverified claim as proof of fit, material, or performance. Share clear measurements and images, then request written confirmation of the quoted configuration. If an existing panel is available, using it as a reference can help resolve questions that measurements alone may leave open.
The reliable way to select an FLC2000 corrugated shaker screen is to verify the exact shaker, compare the panel’s dimensions and retention features, and match the screen construction to the application. The designation helps identify the equipment family, but it does not replace a compatibility check. Mesh, material, and performance documentation should be confirmed for the specific product being quoted.
Before contacting Yuanpeng, prepare the shaker make and model, measured panel dimensions in millimeters, photographs of the panel and attachment points, the current screen specification if available, and your quantity and delivery destination. Explain whether you need a like-for-like replacement or want to address a screening problem. Yuanpeng can use these details to review the requested FLC2000 corrugated screen configuration and provide a product and quotation response for your B2B sourcing decision.
For more information, please visit flc2000 corrugated shaker screens.