If you are trying to select a ceiling designs, you’ll have lots of options. Let’s look at some of the different styles and systems you can choose for your home...
KENTE Product Page
Dropped Ceilings (aka Hanging Ceilings or Suspended Ceilings)
It goes by many names, but a dropped ceiling provides a simple way to install a ceiling system while still having access to wires, plumbing, HVAC pipes, and other utility materials that are hiding in the ceiling. They are a common choice for offices and commercial space, but they can also be used to effectively finish a basement.
While they can be convenient to install, a dropped ceiling takes as much as six inches or height away from the room, creating problems if the area already has a low overhead.
Direct-Mount Ceilings
One of the most popular and versatile forms of ceilings, a direct-mount system is perfect for many different areas of the home. These ceilings are different from hanging ceilings because instead of hanging from wires a foot below the joists, a direct mount ceiling grid is attached right to the structure. This saves up to a foot or overhead space, making a direct mount ceiling system the right choice for basements and office spaces with low ceilings.
With a direct mount system from CeilingConnex, you or an installation professional can quickly attach the ceiling while retaining simple access to pipes and wiring running through the joists. If you have space that needs a convenient and attractive ceiling but also want to have access to utility components, a direct mount would be the smart choice.
Sheetrock Ceilings
While they have no style or visual appeal, using sheetrock to finish off a ceiling is another option. It can usually be done quickly, although the heavy sheetrock panels require at least two people and can be difficult to handle, especially when lifting them above your head.
Sheetrock is a common choice for finishing a ceiling, but the issue of access becomes a problem. If it is used on a basement ceiling and a water leak occurs, you’ll need to remove and replace a large section of sheetrock, if not the entire ceiling. With a tile ceiling, however, you simply have to replace the tiles that were damaged.
Ceiling Planks
For one of the most decorative ceilings possible, you can choose to install ceiling planks. They are usually installed with a tongue-and-groove system that allows one panel to fit snugly into the other. These planks can be installed to fit a wide range of styles, but they can be very costly compared to other ceiling systems.
Like a sheetrock ceiling, ceiling planks do not allow for access to utilities once they have been installed, so they are not a great choice for basements or other areas where pipes and wires run through the joists.
Tray Ceilings
One of the most unique and stylish types of ceilings, a tray ceiling is built to resemble a tray turned upside down. They are usually flat with the center of the ceiling rising upward about six inches to a foot. This style generates depth for the room and can be used in conjunction with lighting to give a warm, soothing ambiance. This is a common type of ceiling for formal dining rooms.
In tray ceilings, decorative tile is a great way to add dynamics and depth to the raised potion. In this case, a direct-mount portion with grid and mission ceiling tiles would be a great choice.
Ceilings Matter. And although we prefer wood, understanding the different types of ceilings can help you communicate your vision for a space. To see the newest wood ceiling products, check out the Hybrid Panel for a combination of grille and linear panel styles.
The type of ceiling that you choose depends on your particular space as well as your design intent. Do you need it to be elaborate and eye-catching? Or does it need to go beyond basic aesthetics and have superior performance aspects?
9Wood exclusively fabricates custom wood ceilings. However, to help you choose the right design for your space, here are the eight different types of ceilings that are most commonly used in both residential and commercial environments.
A conventional ceiling construction type is commonly found in homes. These ceilings have a standard drywall finish and are made of lower-cost materials, requiring easy installation.
Conventional ceilings are plain and flat – and are usually between 8 to 9 feet high and can fit with typical construction material sizing.
Although more readily accessible, a room can feel closed-in if the ceilings are too low. Raising the ceiling by a few feet can open up space significantly and even increase a building’s value for resale.
But upgrading conventional ceilings comes with a higher price tag, since it will require the use of materials that are not standard fit. You’ll need to weigh the cost and potential resale value, as well as how important the aesthetic appeal is to you.
A suspended ceiling (sometimes referred to as a dropped ceiling) hangs from a metal grid below the existing ceiling that is already in place.
Commonly used with noise-regulating acoustic ceiling tiles, these flat drop ceilings allow designers to conceal mechanical, electrical, plumbing, and lighting fixtures (MEP) above the dropped, exposed ceiling, such as pipes and wiring.
This ceiling variety is most commonly used in commercial buildings, offices, and retail spaces, as suspended ceilings give designers remarkable flexibility. Most wood ceilings are suspended using standard commercial T-bar grids and are a cost-effective option.
Want more information on Ceiling Panel Systems? Feel free to contact us.
--Read More: Types of Suspended Acoustic Ceilings by Charley Coury
Installing a suspended ceiling near MEP fixtures requires a high degree of accuracy and skill, so it’s best to leave installation work to the experts.
Commonly found in high-end homes, churches, libraries, and hotels, coffered ceilings reflect a classic, even luxurious, aesthetic. A pricier option than conventional options, coffered ceilings require installation by specialists who are familiar with this variety.
-- Check out an example at: Texas State University – Alkek Library, Wittliff Collections — San Marcos, TX
Recognizable by its grid of inverted panels that are accentuated by molding, commercial wood coffered ceilings are typically designed to work with standard T-Bar suspension grids – helping to streamline the installation process.
9Wood custom-builds coffers, offering any stain or finish to match your aesthetic needs. If your project is considered retro “historical,” a coffered ceiling might be a good design to consider.
Tray ceilings are multi-level ceilings – they start from one height, then drop as you add levels. As the name suggests, the ceiling layout resembles a tray.
The flat ceiling on the outside of the tray surrounds the raised center, which is the highest part of the ceiling.
Tray ceilings (also known as panned ceilings) become slightly lower with each added step or “level” that surrounds the raised center, creating a three-dimensional effect as the ceiling expands outwards.
These ceilings can add a dramatic effect to a space and also make a room seem taller. Panned ceilings typically have two to three levels, with each level dropping between 5 to 11 inches below the level above. You can add trim or molding as a fascia in between the layers.
When considering a tray ceiling, make sure that the ceiling height is at least 8 feet tall, as dropped borders that go below this height may make a space feel more tight than tall.
A coved ceiling is typically found in formal rooms, theaters, or churches. The Vatican, for example, houses one of the most famous coved ceilings in the world.
Forming a dome-like design, this concave ceiling has curved edges instead of sharp angles between the ceiling and walls and is often built using curved molding or framing. The coves start from the top of the main wall and extend up to the ceiling itself.
The round look of the dome ceiling makes a room appear softer and gentler. In addition to beautifying formal spaces, this ceiling can also serve as an archway to separate one room from another.
If you’re on a budget, keep in mind that builders will often charge extra to install a coved ceiling due to their intricacy.
Cathedral ceilings are often found in large living rooms, dining rooms, bedrooms, and even the master bath.
Cathedral – or vaulted – ceilings are known for their inverted V-shape where the tip of the V is the highest point and the sides of the V slope down.
These high ceilings are made from a variety of materials. Linear Wood is a great option to use, whether planks or panels fastened either continuously or progressively.
-- Check out: Linear Wood Ceilings – The Most Common Questions [VIDEO]
Although beautiful, they present special challenges for home and building owners, as their steep, sloping structure makes it difficult to paint or reach fixtures. For our clients, architects consider suspension loads and fastening methods to ensure proper installation.
More than that, these ceilings consume a lot of energy and if the angled frame is not wide enough, this will reduce the ventilation in the space. As a natural insulator, using wood for this ceiling variety can help regulate the temperature in your space and reduce energy costs.
Shed, or single-slope, ceilings are typically found on the top story of a home, either in the attic or loft.
Creating a distinct look for your room, a shed ceiling will begin at a high point at one wall, then slope down toward the opposite wall.
In commercial architecture, the shed ceiling mirrors a shed roof structure. It also offers designers a great deal of flexibility. Wood ceilings can also be suspended on a slope using a standard suspension grid if the main runners are positioned down the slope.
Beam ceilings are typically found in hallways and corridors for commercial settings and living and dining rooms for residential settings.
Though considered as a contemporary style, it’s actually a traditional ceiling form. Made primarily from hardwoods or Douglas fir, beams give homes a classic, rustic look.
When heavier, load-bearing beams are exposed in the interior of the space, the natural wood provides visual variation from the rest of the room. In cases where load-bearing beams are not required, a copy of the beam is created using plywood and miters – and is used simply for its aesthetic appeal.
Beamed ceilings can be made to fit a range of styles. However, these detailed ceilings can overwhelm a smaller room, so be mindful of where you have these ceilings installed.
Using a Commercial Ceiling Expert for Guidance
For more Ceiling Panel Systems Supplierinformation, please contact us. We will provide professional answers.