h. s. Preiser British Patent 902,667
An anodic assembly for use in cathodic protection of a ship’s hull consists of a rod of platinum or of copper, or a silver-copper alloy, coated with platinum or palladium connected to an insulated cable so that the rod can trail behind the ship.
california research corp. British Patent 902,880
Aromatic nitriles are made by contacting in the vapour phase an alkyl substituted aromatic hydrocarbon (7-15 carbon atoms per molecule) with ammonia and air at 300°-650°C in the presence of a composite catalyst consisting of at least 1% of a heavy metal oxide, e.g. vanadium pentoxide and at least 0.01% by wt. of platinum.
standard oil co. British Patent 903,773
A reforming catalyst is made by impregnating an alumina and/or silica support with compounds of germanium and of platinum and heating the support at over 800°F (900°-1800°F) to form a solid solution comprising germanium and platinum and containing at least 5% each of germanium and platinum, the finished catalyst containing 0.1-10% by wt. of the solid solution.
abbott laboratories British Patent 904,117
Piperidine or a salt thereof is made by hydro-genating pyridine or a salt thereof in the presence of rhodium (0.05-2% by wt. based on wt. of starting material) at a pressure below 125 p.s.i. and a temperature between room temperature and 150°C.
universal oil products co. British Patent 904,732
In the hydrogenation of aromatic hydrocarbons with hydrogen at elevated temperature of not over 427°C, substantially complete saturation of the aromatic hydrocarbons with hydrogen is effected in the presence of a catalyst consisting of an alumina-containing refractory oxide carrier and containing 0.1-2% by wt. of platinum (or another platinum group metal) and one or more alkali or alkaline earth metals (0.01-0.7% °f alkali metal).
e, i. dd pont de nemours & go. British Patent 904,936
A vitreous enamel composition intended for firing on to a ceramic dielectric to form an electrical resistor is composed of 8-90% of finely divided palladium oxide or rhodium oxide and 10-92% of finely divided vitreous enamel flux. Up to 50% of gold, silver or platinum may be included with a minimum of 4% of palladium or rhodium oxide.
imperial chemical industries ltd. British Patent 905,141
An electrolytic cell for manufacture of chlorine and caustic alkali comprises a non-conducting porous diaphragm held between, and in contact with, a perforated sheet metal cathode and a perforated sheet titanium anode support carrying an anode in the form of a coating thereon of a platinum group metal.
the telegraph condenser co. ltd. British Patent 905,323
The negative member of an electrolytic capacitor is made by chemically depositing hydrogen-absorbing material, e.g. palladium or platinum black, on a basis body of conductive material, e.g. silver. For example, a silver body may be boiled in an acidified solution of palladium chloride.
universal oil products co. British Patent 905,499
Platinum—and/or palladium—on alumina catalyst composite is activated by passing an oxide of nitrogen at 25°-1000°C through the dry composite, which is then subjected to separate treatments of oxidation with a free oxygen-containing gas and of reduction with a hydrogen-containing gas.
union carbide corp. British Patent 905,673
An alloy which is resistant to hydrogen embrittle-ment resulting from electrochemical action consists of tantalum, a tantalum-titanium alloy or a 10% chromium stainless steel, and 0.05-5.0% by wt. of a platinum group metal, gold, rhenium or alloys thereof. Examples: (1) 99.5% tantalum and 0.5% platinum; (2) 49.5% titanium, 0.5% platinum and balance tantalum.
engelhard industries inc. British Patent 906,392
Marine oils are hydrogenated by treatment with hydrogen in the presence of a palladium-containing catalyst as sole catalytically active metal. 0.01-10% by wt. palladium supported on carbon is used.
philips electrical industries ltd. British Patent 906,961
A discharge tube grid of molybdenum to be coated with platinum, is first coated with an intermediate layer of iron, cobalt or nickel having a rough surface and a platinum layer is then electrodeposited thereon.
engelhard industries inc. British Patent 906,994
A propylene-containing gas is purified by mixing the gas with hydrogen and passing the mixture over a catalyst containing palladium, rhodium or platinum metal or a mixture of two of them at a temperature above 120°C. Palladium on activated alumina may be used.
imperial chemical industries ltd. British Patent 907,154
Dinitrotoluenes are reduced to diaminotoluenes by gradually adding the dinitrotoluenes and hydrogen to a suspension of palladium or platinum catalyst in an aqueous solution of the diaminotoluenes at a temperature of 110°-140°C. The amount of catalyst used is such that from 15-150 parts by wt. of palladium or platinum are present for every 1,000,000 parts by wt. of total dinitrotoluenes to be reduced.
engelhard industries inc. British Patent 908,528
A thermocouple has a positive element formed of an alloy of 3-15% gold, 55-83% palladium and 14-34% platinum. The negative element consists of an alloy of 60-65% gold and 35-40% palladium.
engelhard industries inc. British Patent 908,639
A saturated or unsaturated aldehyde or ketone (other than an alpha-beta unsaturated aldehyde or ketone) is hydrogenated by treating it in liquid phase with hydrogen in the presence of a rhodium-containing catalyst. A 5% rhodium on carbon powder catalyst is referred to.
deutsche gold-und silber-scheideanstalt German Patent 1,127,091
An alloy of 24-40% palladium, 0.5-7% nickel and 55-71% gold is used to form the negative limb of a thermoelement.
standard oil co. U.S. Patent 3,042,197
A hydrogenatable feed stock is contacted with hydrogen gas under hydrogenation conditions with a catalyst composed of 0.05-1 % by wt. of platinum, 0.05-6% by wt. of rhiocyanate ion on an alumina support.
engelhard industries inc. U.S. Patent 3,042,627
A platinum-alumina catalyst having a low halogen ion content is prepared by commingling alumina in an aqueous medium with a platinum metal halogen-containing compound (halogen selected from Group VIIB with atomic number from 35-53), drying, heating to calcination temperature of at least 800°F in an inert atmosphere and then further calcining the product in an oxidising atmosphere to reduce halogen to a low concentration.
allied chemical corp. U.S. Patent 3,042,672
3-aminopropyl isocyanurates are produced by reacting bis-(or tris)-(2-cyanoethyl) isocyanurate in the presence of a platinum or palladium hydrogenation catalyst.
esso research & engineering co. U.S. Patent 3,043,770
A hydrocarbon oil feed boiling at about 350°F rich in polynuclear aromatics is hydrocracked at 875°-1050°F and a pressure of 200-1000 p.s.i.g. in the presence of platinum on era alumina, produced from aluminium alcoholate, as catalyst and at a feed rate between 0.5 and 3 w/h/w in presence of 1000-5000 s.c.f. of hydrogen per barrel to convert the feed to high octane gasoline.
engelhard industries inc. U.S. Patent 3,044,155
A spinnerette is made of an alloy of 70% gold and 30% platinum by wt., which has been electroplated with rhodium or ruthenium.
phillips petroleum co. U.S. Patent 3,046,317
A normally liquid normal alkane (at least 5 atoms per molecule) is hydrocracked by contacting it, admixed with hydrogen, and under hydrocracking conditions, with a catalyst composed of 0.1-10 wt. % of a platinum metal mixed with boria and zirconia.
e. r. wolcott U.S. Patent 3,049,422
Platinum or platinum compounds are recovered from finely divided ore containing them by treating the ore with a gaseous mixture of nitrosyl chloride and chlorine produced from aqua regia at a high enough temperature to cause only these metals to form volatile compounds, which are then separated from the ore.
engelhard industries inc. U.S. Patent 3,049,577
A thermocouple comprises a negative element formed of a platinum group metal core within a sheath also of a platinum group metal. The core consists of a number of compacted interfused elongated bodies in direct contact with the sheath. The positive element is formed of a platinum group metal alloy bonded to the negative element.
englehard industries inc. U.S. Patent 3,049,753
The material defining the extrusion orifices in a spinnerette plate is composed of a sintered mixture of tungsten carbide powder and 1-20% of a platinum group metal powder.
general electric co. U.S. Patent 3,053,652
A high temperature brazing alloy contains
10-20% chromium
5-15% palladium
10-40% manganese
1- 5% silicon
Balance nickel.
leesona corp. U.S. Patent 3,053,741
A non-porous layer of palladium-silver alloy is electrodeposited on an article from an ammoniacal nitrate solution of palladium and silver having a pH of 7.5-11.
universal oil products co. U.S. Patent 3,055,811
A platinum-plated titanium anode is made by electrodepositing on a titanium base a coating of amorphous platinum and activating the latter by heating at above 600°F in the presence of an air stream containing hydrocarbon vapours, for a long enough period to initiate catalytic oxidation of the vapours on the platinum surface.
engelhard industries inc. U.S. Patent 3,055,840
A catalyst consists of a support carrying a deposit of ruthenium and, as a promoter, platinum, rhodium or palladium. The ruthenium constitutes at least 20% of the catalytically active metal content of the catalyst.
engelhard industries inc. U.S. Patent 3,056,646
The ignition and combustion of a mixture of methane, oxygen and inert gases is effected by contacting the mixture at above its ignition temperature, but not over 4000C, with a catalyst consisting of rhodium or rhodium and another platinum group metal.
If you have any questions on Titanium Perforated Sheet. We will give the professional answers to your questions.