petroleum coke (often abbreviated Pet coke or petcoke) is a carbonaceous solid derived from oil refinery coker units or other cracking processes. Petroleum coke is typically created in a drum and solidifies. Once the products cooling cycle is complete, the coke is hydraulically cut from the drum and transported to a pad or pit, where the water then separates from the coke. It then can be loaded to barge or railcar for shipping to its next destination.
With increasing environmental pressures, a new solution was sought for eliminating the coking pits and pads, as the run off from the evaporative dewatering process was not environmentally friendly. Plus, the time that it took to dewater the pet coke was significant, causing significant delay and multiple handling points between cutting and shipment.
GK’s Engineered Solutions Group developed a patented single line vibratory dewatering process which dewaters and transports the pet coke directly from the coking process to the shipping load point, which reduced staging steps from three times per day to potentially one per day, with less environmental risk. GK’s Engineered Products Group delivered the final product in less than 9 months.
By implementing GK’s vibratory dewatering system, the end customer eliminated multiple handling points, eliminated their large dewatering pad, and increased overall capacity by 50%. With multiple units, redundancy was achieved for 100% uptime performance.
Carbon Electrode laminated magnet Inconel Wire Alkali-free Fiberglass Filter Mesh For Aluminium Welded Razor Wire Mesh glass blasting media near me stainless steel welded wire mesh Socket Fig Long Life Crucible Clamps Pot Magnet Motor Magnet Galvanized Steel Coils 30LBS RAIL Titanium Perforated Sheet Stainless steel ferrule mesh Metal coil mesh