ACI Committee 549 (2008), Thin Reinforced Cementitious Products & Ferrocement, American Concrete Institute, Farmington Hills, MI.
Alsayed, S.H., Al-Salloum, Y.A., Almusallam, T.H. and Siddiqui, N.A. (2010), "Seismic response of FRP-upgraded exterior RC beam-column joints", J. Compos. Constr., ASCE, 14(2), 195-208.
https://doi.org/10.1061/(ASCE)CC.1943-5614.0000067Ascione, F., Lamberti, M., Razaqpur, A.G. and Spadea, S. (2017), "Strength and stiffness of adhesively bonded GFRP beamcolumn moment resisting joints", Compos. Struct., 60, 1248-1257.
Behera, M., Bhattacharyya, S.K., Minocha, A.K., Deoliya, R. and Maiti, S. (2014), "Recycled aggregate from C&D waste & its use in concrete-A breakthrough towards sustainability in construction sector: A review", Constr. Build. Mater., 68, 501-516.
https://doi.org/10.1016/j.conbuildmat.2014.07.003Bentayeb, F., Tahar, K.A. and Chateauneuf, A. (2008), "New technique for reinforcement of concrete columns confined by embedded composite grid", Constr. Build. Mater., 22, 1624-1633.
https://doi.org/10.1016/j.conbuildmat.2007.06.015Chao, L., Guoliang, B., Letian, W. and Zonggang, Q. (2010), "Experimental study on the compression behavior of recycled concrete columns", Proceedings of the International RILEM Conference on the Waste Engineering and Management, 614-621.
Chidambaram, R.S. and Agarwal, P. (2014), "The confining effect of geo-grid on the mechanical properties of concrete specimens with steel fiber under compression and flexure", Constr. Build. Mater., 71, 628-637.
https://doi.org/10.1016/j.conbuildmat.2014.08.059Choi, J.H. (2008), "Seismic retrofit of reinforced concrete circular columns using stainless steel wire mesh composite", Can. J. Civil Eng., 35(2), 140-147.
https://doi.org/10.1139/L07-079Corazao, M. and Durrani, A.J. (1989), "Repair and strengthening of beam-to-column joints subjected to earthquake loading", Technical Report NCEER-89-0013, National Center for Earthquake Engineering Research, State University of New York at Buffalo, N.Y.
Corinaldesi, V. and Moriconi, G. (2006), "Behavior of beamcolumn joints made of sustainable concrete under cyclic loading", J. Mater. Civil Eng., 18(5), 650-658.
https://doi.org/10.1061/(ASCE)0899-1561(2006)18:5(650)Corinaldesi, V., Letelier, V. and Moriconi, G. (2011), "Behavior of beam-column joints made of recycled-aggregate concrete under cyclic loading", Constr. Build. Mater., 2, 1877-1882.
https://doi.org/10.1016/j.conbuildmat.2010.11.072Esfahani, M.R., Kianoush, M.R. and Tajari, A.R. (2007), "Flexural behaviour of reinforced concrete beams strengthened by CFRP sheets", Eng. Struct., 29(10), 2428-2444.
https://doi.org/10.1016/j.engstruct.2006.12.008Federal Emergency Management Agency (FEMA-308) (1998), Repair of Earthquake Damaged Concrete and Masonry Wall Buildings, 24-42.
Ghobarah, A. and Said, A. (2002), "Shear strengthening of beamcolumn joints", Eng. Struct., 24(7), 881-888.
https://doi.org/10.1016/S0141-0296(02)00026-3Ghobarah, A., Aziz, A. and Biddah, T.S. (1997), "Rehabilitation of reinforced concrete frame joints using corrugated steel jacketing", ACI Struct. J., 4(3), 283-294.
Hadi, M.N.S. and Tran, T.M. (2016), "Seismic rehabilitation of reinforced concrete beam-column joints by bonding with concrete covers and wrapping with FRP composites", Mater. Struct., 49(1-2), 467-485.
https://doi.org/10.1617/s11527-014-0511-4Hamad, B.S., Daw, A.H., Daou, A. and Chehab, G.R. (2018), "Studies of the effect of recycled aggregates on flexural, shear, and bond splitting beam structural behavior", Case Stud. Constr. Mater., 9, e00186.
https://doi.org/10.1016/j.cscm.2018.e00186Han, B.C., Yun, H.D. and Chung, S.Y. (2001), "Shear capacity of reinforced concrete beams made with recycled aggregate", ACI Spec. Publ., 200, 503-516
Hansen, T.C. (1992), Recycling of Demolished Concrete and Masonry, Taylor and Francis, Oxfordshire, UK.
IS 10262 (2009), Guidelines for Concrete Mix Design Proportioning (CED 2: Cement and Concrete), Bureau of Indian Standard New Delhi.
IS 1199 (1959), Methods of Sampling and Analysis of Concrete, Bureau of Indian Standard New Delhi.
IS 519 (1959), Method of Tests for Strength of Concrete, Bureau of Indian Standard New Delhi.
IS 5816 (1999), Method of Test Splitting Tensile Strength, Bureau of Indian Standard New Delhi.
Kalogeropoulos, G.I. and Tsonos, A.G. (2014), "Effectiveness of R/C jacketing of substandard R/C columns with short lap splices", Struct. Monit. Mainten., 1(3), 273-292.
https://doi.org/10.12989/smm.2014.1.3.273Karayannis, C.G. and Sirkelis, G.M. (2008), "Strengthening and rehabilitation of RC beam-column joints using C-FRP jacketing and epoxy resin injection", J. Earthq. Eng. Struct. Dyn., 37, 769-790.
https://doi.org/10.1002/eqe.785Karayannis, C.G., Chalioris, C.E. and Sideris, K.K. (1998), "Effectiveness of RC beam-column joint repair using epoxy resin injections", J. Earthq. Eng., 2(2), 217-240.
https://doi.org/10.1080/13632469809350320Kumar, V. and Patel, P.V. (2016), "Strengthening of axially loaded circular concrete columns using stainless steel wire mesh (SSWM)-Experimental investigations", Constr. Build. Mater., 124, 186-198.
https://doi.org/10.1016/j.conbuildmat.2016.06.109Li, B., Lam, E.S., Wu, B. and Wang, Y. (2015), "Seismic behavior of reinforced concrete exterior beam-column joints strengthened by ferrocement composites", Earthq. Struct., 9(1), 233-256.
https://doi.org/10.12989/eas.2015.9.1.233Limbachiya, M.C., Koulouris, A., Roberts, J.J. and Fried, A.N. (2004), "Performance of recycled aggregate concrete", RILEM International Symposium on Environment Conscious Materials and System for Sustainable Development, 127-136.
Marthong, C. (2018), "Behaviour of recycled aggregate concrete beam-column connections in presence of PET fibers at the joint region", Comput. Concrete, 21(6), 669-679.
https://doi.org/10.12989/CAC.2018.21.6.669Marthong, C. and Marthong, S. (2016), "An experimental study on the effect of PET fibers on the behavior of exterior RC beamcolumn connection subjected to reversed cyclic loading", Struct., 5, 175-185.
https://doi.org/10.1016/j.istruc.2015.11.003Marthong, C., Dutta, A. and Deb, S.K. (2013), "Seismic rehabilitation of RC exterior beam-column joints using epoxy resin injection", J. Earthq. Eng., 17(3), 378-398.
https://doi.org/10.1080/13632469.2012.738284Mosallam, A.S. (2000), "Strength and ductility of reinforced concrete moment frame joints strengthened with quasi-Isotropic laminates", Compos. Part B-Eng., 31(6-7), 481-497.
https://doi.org/10.1016/S1359-8368(99)00068-2Mukherjee, A. and Joshi, M. (2005), "FRPC reinforced concrete beam-column joints under cyclic excitation", Compos. Struct., 70, 185-199.
https://doi.org/10.1016/j.compstruct.2004.08.022Naeim, F. and Kelly, J.M. (1999), Design of Seismic Isolated Structures from Theory to Practice, John willey & sons, inc.
Park, Y.J. and Ang, A.H.S. (1985), "Mechanistic seismic damage model for reinforced concrete", J. Struct. Eng., ASCE, 111(4), 722-739.
https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722)Patel, P.V., Raiyani, S.D. and Shah, P.J. (2018), "Torsional strengthening of RC beams using stainless steel wire mesh-Experimental and numerical study", Struct. Eng. Mech., 67(4), 391-401.
https://doi.org/10.12989/sem.2018.67.4.391Rao, M.C., Bhattacharyya, S.K. and Barai, S.V. (2011), "Influence of field recycled coarse aggregate on properties of concrete", Mater. Struct., 44, 205-20.
https://doi.org/10.1617/s11527-010-9620-xSaleh, H.A., Al-Salloum, A.Y., Almusallam, T.H. and Nadeem, A.S. (2010), "Seismic response of FRP-upgraded exterior beamcolumn joints", J. Compos. Constr., ASCE, 14(2), 195-208.
https://doi.org/10.1061/(ASCE)CC.1943-5614.0000067Shaaban, I.G. and Seoud, O.A. (2018), "Experimental behavior of full-scale exterior beam-column space joints retrofitted by ferrocement layers under cyclic loading", Case Stud. Constr. Mater., 6, 61-78.
Shaikh, F., Kerai, S. and Kerai, S. (2015), "Effect of micro-silica on mechanical and durability properties of high volume fly ash recycled aggregate concretes (HVFA-RAC)", Adv. Concrete Constr., 3(4), 317-331.
https://doi.org/10.12989/acc.2015.3.4.317Shannag, M.J. and Alhassan, M.A. (2005), "Seismic upgrade of interior beam-column sub-assemblages with high performance fiber reinforced concrete jackets", ACI Struct. J., 102(1), 131-138.
Silva, M.F.A. and Haach, V.G. (2016), "Parametrical study of the behavior of exterior unreinforced concrete beam-column joints through numerical modeling", Comput. Concrete, 18(2), 215-233.
https://doi.org/10.12989/cac.2016.18.2.215Subhash, C.Y., Dumpati, C.T. and Mohammed, S. (2016), "Performance studies on concrete with recycled coarse aggregates", Adv. Concrete Constr., 4(4), 263-281.
https://doi.org/10.12989/acc.2016.4.4.263Teng, J.G., Chen, J.F., Smith, S.T. and Lam, L. (2002), FRP-Strengthened RC Structures, John Wiley & Sons, Ltd.
Tsonos, A.G. (2007), "Cyclic load behaviour of reinforced concrete beam-column subassemblages of modern structures", ACI Struct. J., 194(4), 468-478.
Tsonos, A.G. (2008), "Effectiveness of CFRP-jackets and RCjackets in post-earthquake and pre-earthquake retrofitting of beam-column sub-assemblages", Eng. Struct., 30, 777-793.
https://doi.org/10.1016/j.engstruct.2007.05.008Tsonos, A.G. (2009), "Ultra-high performance fiber reinforced concrete: an innovative solution for strengthening old R/C structures and for improving the FRP strengthening method", Materials Characterization Computational Methods and Experiments IV, WIT Transactions on Engineering Sciences, 64, 273-284, The New Forest, UK.
Tsonos, A.G. (2014), "A new method for earthquake strengthening of old R/C structures without the use of conventional reinforcement", Struct. Eng. Mech., 52(2), 391-403.
https://doi.org/10.12989/sem.2014.52.2.391Tsonos, A.G. (2014), "An innovative solution for strengthening of old R/C structures and for improving the FRP strengthening method", Struct. Eng. Mech., 1(3), 323-338.
Tsonos, A.G. and Papanikolaou, K.V. (2003), "Post-earthquake repair and strengthening of reinforced concrete beam-column connections (Theoretical and experimental investigation)", Bull. NZ Soc. Earthq. Eng., 36(2), 73-93.
Verma, S.K. and Ashish, D.K. (2017), "Mechanical behavior of concrete comprising successively recycled concrete aggregates", Adv. Concrete Constr., 5(4), 303-311.
https://doi.org/10.12989/acc.2017.5.4.303Vidjeapriya, R. and Jaya, K.P. (2013), "Experimental study on two simple mechanical precast beam-column joints under reverse cyclic loading", J. Perform. Constr. Facil., 27(4), 402-414.
https://doi.org/10.1061/(ASCE)CF.1943-5509.0000324Viviana, C., Gonzalez, L. and Moriconi, G. (2014), "The influence of recycled concrete aggregates on the behavior of beamcolumn joints under cyclic loading", Eng. Struct., 60, 148-154.
https://doi.org/10.1016/j.engstruct.2013.12.024Xiao, J., Sun, Y. and Falkner, H. (2006), "Seismic performance of frame structures with recycled aggregate concrete", Eng. Struct., 28, 1-8.
https://doi.org/10.1016/j.engstruct.2005.06.019Xiao, J.Z., Li, W., Fan, Y. and Huang, X. (2012), "An overview of study on recycled aggregate concrete in China (1996-2011)", Constr. Build. Mater., 31, 364-83.
https://doi.org/10.1016/j.conbuildmat.2011.12.074If you have any questions on stainless steel welded wire mesh. We will give the professional answers to your questions.